Sleeve for .032 Pushrod
One 4" piece
For use with supporting long lengths of .032 pushrods that are over 4" in length. The sleeve can be cut in to 1" lengths and glued in place or taped if on an edge to support the wire as a guide.
Be sure to ad the sleeve before bending the pushrod at both ends if not using E/Z an connector.
For use with supporting long lengths of .032 pushrods that are over 4" in length. The sleeve can be cut in to 1" lengths and glued in place or taped if on an edge to support the wire as a guide.
Be sure to ad the sleeve before bending the pushrod at both ends if not using E/Z an connector.

- Item #: .032 sleeve